-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Plating and Surface Finish: Assemblers' POV
January 13, 2017 | Stephen Las Marias, I-Connect007Estimated reading time: 2 minutes
Joemar D. Apolinario, manufacturing engineering manager, and Dnichols R. Dulang, process engineer at EMS firm Integrated Micro-Electronics Inc. discuss with SMT Magazine the impact of plating and surface finishes on electronics assemblies. They highlight the impact on solderability, the problems with complex components and packages, as well as parameters to consider when it comes to surface finish selection.
Stephen Las Marias: From your perspective, what are the greatest challenges when it comes to plating and surface finishing?
Joemar Apolinario: The greatest challenges that we face include obtaining good connectivity between the PCB and the component, and having good solder joint reliability; proper selection of the surface finish that will satisfy the product application requirements, cost, reliability and compliance to ROHS; proper handling and storage; and signature defects such as visual cosmetics (exposed copper), plating thickness integrity (especially high-value materials such as silver and gold) from the PCB manufacturer.
Dnichols Dulang: The greatest challenges are the problems due to visual cosmetics and solderability, both for TH and SMT pad surfaces.
Las Marias: What are the most common plating and/or surface finishing defects?
Apolinario: Common defects include discoloration (oxidized pad), corrosion, contamination, and exposed copper. These PCB defects normally results in solderability problems, and affect product reliability.
Dulang: Other defects are de-wetting, black pad defect, and tin/silver whiskers.
Las Marias: How do surface finishes affect your assembly process?
Apolinario: If the surface finish is not properly determined based on the product component and application, it will impact solderability. Solder wetting is not good for the oxidized pad. Some characteristics of various surface finish are not compatible with some components like fine pitch ICs due to planarity issues. Some finishes, such as OSP, also require extra sensitivity in handling. One critical point is that we should understand how we handle the different surface finish, so that we can put appropriate controls and parameters that will fit the product applications.
Las Marias: What about plating? How does plating affect your assembly process?
Dulang: Plating is one of the critical parameters. If plating does not comply with the specifications, then there is a strong possibility to encounter assembly problems. Plating can cause functional test failures due to connectivity issues. The worst reliability failure is the intermittent failure due to cracks. Compatibility of surface plating to solder paste and component plating are very critical points.
Las Marias: Are there parameters to consider when it comes to plating and/or surface finishing that will help optimize your assembly process?
Apolinario: The parameters are the right selection of surface finish, then PCB pad cleanliness. Plating thickness should be considered to optimize the assembly process and testing, as well as handling and shelf life.
To read this entire article, which appeared in the January 2017 issue of SMT Magazine, click here.
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.