AIM Appoints Assembly Solutions as Manufacturers’ Representative

Reading time ( words)

AIM Solder is pleased to announce the addition of Assembly Solutions LLC as a new representative for its complete line of solder products, including solder paste, liquid flux, bar, wire, as well as other solder assembly materials.

Assembly Solutions LLC serves clients in the circuit board handling, manufacturing and soldering industries. Jim Danku will be responsible for providing assistance to AIM customers in the Carolinas and Southern Virginia. Jim started out in the electronics industry working for Tooltronic Inc., a distributor in Toronto, ON, Canada. Since then, he has founded and managed two manufacturers’ representative companies, one of which he sold prior to starting his new one, Assembly Solutions LLC.

“We’re pleased to welcome Assembly Solutions as our new representative in the Carolinas and Southern Virginia,” said Andy Dolan, AIM’s Vice President of Sales. “We’re confident that Jim will provide unsurpassed support to AIM customers in the area.”

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.


Suggested Items

Cleaning with Data

03/19/2018 | Barry Matties, I-Connect007
Tom Forsythe, vice president of KYZEN, spoke to Barry Matties about KYZEN’s new process control monitoring and data service. They discussed the drivers behind these developments, the company's focus on managing data, and how KYZEN plans to support an industry embracing more cleaning and Industry 4.0.

Manufacturability: Pad Relief and Mask Relationship to Solder Joint Volume

03/09/2018 | Ken Horky, Peterson Manufacturing
Electronic assembly thermal management has always been an issue but has become more significant as we pack more power and function into a smaller form factor. In recent years, the growing use of LEDs for illumination on a large scale has presented additional thermal demands.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.

Copyright © 2018 I-Connect007. All rights reserved.