-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Three Reasons to Use PCB Panel Routing Techniques
October 12, 2017 | Duane Benson, Screaming CircuitsEstimated reading time: 1 minute
Most PCBs are individually routed—meaning they're not panelized. That doesn't mean that, sometimes, sending them to a PCB assembler in a panel isn't a good idea or even required. Generally, assemblers don't require panels—sometimes called a pallet—but there are some cases when they do.
If the individual PCB, destined for full prototyping service, is smaller than 0.75" x 0.75", it needs to be panelized. If a PCB needing short run production service is less than 16 square inches, it needs to be in a panel of at least 16 square inches to qualify for short run.
Why else might you want to panelize PCBs?
- Protection: If you've got a lot of small boards, it's easier to handle and protect then when they're in a panel. A few panels can be more safely packed coming and going from your company to an assembler.
- Safety: You may be able to get the boards through a factory faster. If you have a really large number and need them quickly, panelizing them may enable that fast turn. With a lot of boards, sometimes it simply isn't physically possible to put them all on the machine, run them and take them off, in a short turn time. Panelize them and the machine will be running longer for each board change, which reduces the total run time.
- Cost: It may also cost you less. If you use leadless parts like BGAs, QFNs or LGAs, you can usually reduce your cost a bit by panelizing the boards. Leadless parts cost a little extra because of the X-ray test needed, but the extra handling is mostly per board, rather than per part. One panel of 10 boards with 10 BGA, in total, will cost a little less than 10 individual boards with one BGA each.
Suggested Items
IMI Taps New Opportunities to Sustain Grit in China
03/28/2024 | IMIIntegrated Micro-Electronics, Inc. (IMI), Joey S. Bantatua, IMI China’s head of operations and general manager was recently interviewed by Asia Electronics Industry (AEI) magazine where he talked about the prospects of the country both as a market and a production hub.
Electronics Industry Sentiment Rises in March
03/27/2024 | IPCIPC releases March 2024 Global Sentiment of the Electronics Supply Chain Report
The Delicate Balance of Sustainable Business and Going Green
03/25/2024 | I-Connect007 Editorial TeamAlex Stepinski is known throughout the industry as an innovator and disruptor committed to environmental sustainability, primarily through his current work around zero liquid discharge (ZLD) for PCB fabrication. But Alex says financial sustainability must come first. Standing firm in his belief that green is the most financially sustainable option for manufacturing and financial success, he explains his position and vision for a greener, more lucrative future for bare board fabricators. “Before I retire in about 10 years,” he says, “I want to make sure that all new fabs, and at least 25% of the old ones are zero liquid discharge in this industry.”
BTU International Redefines Operational Value and Efficiency with the Aurora Platform of Reflow Ovens
03/20/2024 | BTU International, Inc.BTU International, Inc., a leading supplier of advanced thermal processing equipment for the electronics manufacturing market, is proud to announce that its new Aurora platform of reflow ovens is designed to minimize the Cost of Ownership (CoO) while maximizing performance and operational value for its users.
Terran Orbital Unveils Next-Generation SmallSat GEO Solution
03/15/2024 | BUSINESS WIRETerran Orbital Corporation, a global leader in satellite-based solutions primarily serving the aerospace and defense industries, announced their entrance into the small satellite geosynchronous orbit (GEO) market with their SmallSat GEO™ solution for satellites above 500kg.