Designing Electronics for Harsh Conditions


Reading time ( words)

We expect a lot from our products, especially our electronic products. Think about it: cellphones, wearables, medical devices—for some reason we think they should still work after being immersed in liquid, left outdoors in freezing temperatures or dropped on concrete from a standing position.

Sometimes that's the case. We drop a smartphone in the bathtub then stick it in a bag of rice and hope for the best. Many times, though, not even Uncle Ben's can save your poor, ill-treated phone. But that wasn't because the designer didn't anticipate your fumble.

Any product designer worth their salt is going to design products to protect the electronics to withstand any abuse you can think of—and much more. Take that smartphone or laptop computer for example. The product has to work whether the user is at a desk in Atlanta, a warehouse in California or a factory floor in Vietnam.

The Swedish company Handheld makes everything from rugged handheld devices to high-performance rugged tablets. The products usually look and operate like their everyday counterparts, but you might find them a little heavier or bulkier. The differences typically rest on tweaks in design and adjustments in materials used to make the product. 

The Handheld website is chock full of great information on how they create rugged products. Here are some of the ways they build computers for rugged use:

  • Rather than using rotating hard drives, their computers have solid-state drives that are resistant to physical shock.
  • Their computers contain stiffeners, often made from aluminum, to prevent interior components and boards from flexing on impact. The outer case and bumpers are designed to absorb the energy from a drop, minimizing internal damage. 
  • Rugged computers displays use chemically strengthened glass to prevent scratches or cracks. The display is backlit to improve readability when outdoors. 
  • Some computers include internal heaters for operation in extremely cold temperatures. The heater is able to get rid of condensation that can happen during a temperature change. 

Designing electronics for harsh conditions requires understanding the environment in which the product will operate, the customer's requirements, and common industry standards or specifications.

Examples of Harsh Conditions

  • Extreme temperatures, both hot and cold
  • Temperature variations
  • Dust and other particulates
  • Combustible conditions
  • Moisture, humidity or submersion
  • Regular or irregular vibration
  • Sudden or continuous impact
  • Power surges, either natural (i.e. lightning) or man-made

Questions to Ask

  1. What is the product used for?
  2. Where will it be used?
  3. Are there temperature extremes?
  4. How wide are temperature fluctuations?
  5. Does this product need to be watertight or airtight?
  6. How tight do those seals need to be?
  7. What sort of physical pressure does it need to withstand?
  8. How hard does the case need to be?
  9. How light does it need to be?
  10. Does the product need to be built to specific standards, i.e. Ingress Protection (IP), National Electrical Manufacturers Association (NEMA), Potentially Explosive Atmosphere (ATEX)?

Spec Standards

Products designed for harsh environments might have to meet the following standards:

Ingress Protection (IP) covers both moisture and particulates.

IP ratings are displayed using two digits. The first digit signifies the rating for dust/particulates, the second digit signifies the rating for liquids.

MIL STD 810g is a standard used by the U.S. military to test equipment in a variety of extreme conditions or shocks.

What is Required by MIL STD 810G?

The MIL STD 810g standard includes 28 different testing methods in scenarios that include:

  • High temperature
  • Low Temperature
  • Rain
  • Humidity
  • Sand/Dust
  • Immersion
  • Vibration 
  • Shock

Although this standard was initially created for products designed for military applications, MIL STD 810g has made its way into commercial application as well. However, no commercial organizations or agencies actually certify for MIL STD 810g. Chassis Plans, a producer of rugged computers and LCD displays for the military, produced an interesting white paper explaining MIL STD 810g, and how it has been applied (and misapplied) in commercial settings.

Share


Suggested Items

Interview with Yusaku Kono: Rising Star Award Recipient

04/18/2018 | Patty Goldman, I-Connect007
The IPC Rising Star Award is given to IPC members who have taken leadership roles and provided support to IPC standards, education, advocacy and solutions to industry challenges. Their contributions have made significant impact upon IPC and industry within the past five years and will continue to have a lasting impact for many years to come.

Automotive Electronics Still in the Driver’s Seat

04/11/2018 | Stephen Las Marias, I-Connect007
The past year was one of the strongest years that the PCB supply chain and the rest of the electronics manufacturing industry in general, has seen. Everyone we talked to at the shows were optimistic that the strong growth in the industry in 2017 will continue through 2018. And most industry players point to one thing when it comes to what’s driving this strong growth—automotive electronics.

Interview with Linda Woody: Dieter Bergman IPC Fellowship Award Recipient

04/04/2018 | Patty Goldman, I-Connect007
The Dieter Bergman IPC Fellowship Award is given to individuals who have fostered a collaborative spirit, made significant contributions to standards development, and have consistently demonstrated a commitment to global standardization efforts and the electronics industry. This year, Linda Woody is one of the two recipients of the award. Here's what she has to say.



Copyright © 2018 I-Connect007. All rights reserved.