Indium's Andreas Karch to Present at IMAPS Autumn Conference in Munich


Reading time ( words)

Indium Corporation expert, Andreas Karch, will present at the IMAPS Autumn Conference, October 18-19 in Munich, Germany.

At the conference, Karch will deliver his presentation entitled New Solder Alloy with Extended Temperature Range for High-Reliability Applications. He will review test results that demonstrate how a new alloy excels in harsh environments, including wide temperature range and high CTE mismatch. Karch will also share data from existing application qualifications.

As the regional technical manager for Germany, Austria, and Switzerland, Karch provides support to Indium Corporation’s customers in those regions, including sharing process knowledge and making product recommendations. He has more than 20 years of automotive industry experience, including the advanced development of customized electronics. Karch is an ECQA-certified integrated design engineer, has a six sigma yellow belt, and was selected by the Austrian Patent Office as one of the 2014 recipients of the Top 10 Inventum Awards for an automotive LED assembly.

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here.

Share


Suggested Items

Indium on Voiding and Auto Electronics Test Standard

10/09/2018 | Stephen Las Marias, I-Connect007
In this interview with I-Connect007, Indium Corporation Technical Manager Jonas Sjoberg discusses voiding and other key challenges in soldering, as well as an automotive electronics testing standard based out of South Korea that is seeing increased utilization all over Asia. He also talks about the increasing trend in manufacturers moving to Type 5 and Type 6 solder powders, and how this is causing its own set of challenges in printing.

RTW IPC APEX EXPO: Indium's Brook Sandy-Smith on PMI-Squared

05/25/2018 | Real Time with...IPC
Indium Corporation's Brook Sandy-Smith discusses ionic process residues on PCB assemblies and introduces the concept of "PMI-squared" (process material interaction investigation), the topic of an IPC Technical Buzz Session at IPC APEX EXPO 2018.

RTW IPC APEX EXPO: Indium Discusses Fighting Solder Voids

03/06/2018 | Real Time with...IPC
Voiding has increasingly become one of the most critical challenges in the soldering process. In this interview, Christopher Nash, product manager for the PCB assembly solder paste business of Indium, speaks about how the company is helping customers address the voiding challenge.



Copyright © 2018 I-Connect007. All rights reserved.