-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
How to Avoid Common Wave Soldering Issues
November 13, 2018 | Neil Blundell, Blundell Production EquipmentEstimated reading time: 3 minutes
Wave soldering involves using waves of molten solder that act as glue to attach electrical components such as resistors, capacitors, and LED lights on the PCB. During this process, the electrical components are placed on the PCB, which is subsequently passed across a pumped wave of solder.
To prevent the solder from bridging the connections, a protective coating must be applied. The pouring solder wets the exposed metallic areas of the board and creates a reliable connection between the mechanical and electric components. While this process is expedient and efficient in producing high-quality products, it sometimes experiences glitches that can be prevented or corrected. Our posting explores some of the main issues and how to remedy them.
Pin and Blow Holes
These two types of holes occur when the gas bursts during the soldering process. They are either caused by a single blast or a continuous escape of gas. Blow and pin holes are basically the same, but some engineers use the two terms to distinguish the size of the problem. This issue is corrected by improving the quality of the board with a 25 µm of copper in the hole. It can also be eliminated through baking the board to remove excess moisture, but this solution does not address the root cause of the problem.
Solder Shorts on PCBs
Due to the ever-decreasing component pitches, the occurrence of solder shorts is on the rise. In the past years, the pitch between terminals used to be 0.050 inches; this size has since been reduced to 0.02 inches. This issue occurs when the solder fails to separate from two or more leads before it solidifies. Therefore, reducing the length and size of the pad will go a long way in decreasing the amount of solder that will be held on the board. While this seldom happens, solder short can also occur on the top side of the board. This occurs when too much pressure induces excessive solder penetration.
Poor or Inconsistent Hole Fill
This problem occurs when the solder wets the leads but fails to touch the surfaces of the through-hole. Poor flux application and low pre-heat temperature are the common causes of inconsistent hole fill. This issue is often a natural consequence of a manufacturer's action of changing from foam to spray fluxer, which causes poor flux penetration into the holes. Inconsistent hole fill can be avoided by maintaining the temperature of the printed board between 100–110°C. This is especially true for multilayer and double-sided PCBs. Single boards are processed at a much lower temperature as no solder penetration is required.
Inconsistent hole fill can be avoided by maintaining the temperature of the printed board between 100-110°C. This is especially true for multilayer and double-sided PCBs. Single boards are processed at a much lower temperature as no solder penetration is required.
Lifted Components
Lifted components on PCBs occur due to a combination of physical and thermal issues. The heat produced during the soldering process can lower the adhesion of the copper, which makes the board weak. As such, any forceful handling of the board may cause a component lift. This problem can be avoided by using careful handling of the board when removing it from the soldering machine. You could also use epoxy with high thermal resistance and avoid exposing the PCB to excessive heat for a prolonged period.
Conclusion
Wave soldering is an effective method employed when assembling vital electrical components on printed circuit boards. However, sometimes a few problems such as pinholes, inconsistent hole fill, lifted components, and solder shorts might be experienced. By taking a little extra care and diligence, it's quite apparent that these issues can be effectively avoided or corrected.
Neil Blundell is the managing director of Blundell Production Equipment. For more information on Blundell Production Equipment, click here.
Suggested Items
Trouble in Your Tank: Supporting IC Substrates and Advanced Packaging, Part 5
03/19/2024 | Michael Carano -- Column: Trouble in Your TankDirect metallization systems based on conductive graphite or carbon dispersion are quickly gaining acceptance worldwide. Indeed, the environmental and productivity gains one can achieve with these processes are outstanding. In today’s highly competitive and litigious environment, direct metallization reduces costs associated with compliance, waste treatment, and legal issues related to chemical exposure. What makes these processes leaders in the direct metallization space?
AT&S Shines with Purest Copper on World Recycling Day
03/18/2024 | AT&SThe Styrian microelectronics specialist AT&S is taking World Recycling Day as an opportunity to review the progress that has been made in recent months at its sites around the world in terms of the efficient use of resources:
Matrix to Exhibit at IPC APEX EXPO 2024 in Anaheim, CA
03/05/2024 | MatrixMatrix will be exhibiting at IPC APEX EXPO 2024, to be held on April 9-12, 2024, at the Anaheim Convention Center, Anaheim, CA.
The Chemical Connection: Getting to Know Your Vendor
02/16/2024 | Don Ball -- Column: The Chemical ConnectionAfter working for a capital equipment supplier for almost 50 years, I’ve found that the most important part of getting to know your vendor is good communication among all parties. While contact between fabricators of a constantly changing product line and the designers of those products may occur daily or weekly, conversations between you and your equipment supplier may be years apart. That lengthy gap often means that previous contacts may have been promoted, retired, or moved on to other opportunities. You may have also migrated to a new supplier with whom you have little or no history. In either case, you will be interacting with someone you are unfamiliar with (as they are with you). Therefore, it is essential for both sides to communicate clearly so expectations will align.
EIPC Winter Conference 2024, Day 2: A Closer Look at Global Trends
02/14/2024 | Pete Starkey, I-Connect007The opening session of the second day’s conference proceedings focused on global PCB trends and was introduced and moderated by Dr. Michele Stampanoni, vice president of strategic sales and business development at Cicor Group in Switzerland. He opened the session with Dr. Hayao Nakahara’s knowledgeable and enlightening video presentation on the IC substrates industry.