Chuck Bauer: SMTAI 2019 Founder's Award Recipient

Reading time ( words)

At the recent SMTAI conference and exhibition, Chuck Bauer, Ph.D., senior managing director at TechLead Corporation, has received the Founder's Award. According to SMTA, the Founder's Award is presented to a member who has made exceptional contributions to the industry and provided ongoing support and service to the SMTA. Chuck spoke with Nolan Johnson and Happy Holden about the different conferences and organizations he has been involved with and their importance when it comes to passing the torch to the next generation.

Nolan Johnson: Chuck, you just received SMTA Founder's Award. You thanked two main people in your acceptance speech: Wally Doeling, and your wife, Priscilla. How did Wally and the others impact your life?

chuck-bauer-speech.jpgBauer: Wally was a unique individual because I never saw him ever do anything for himself. The lessons he taught me were to share my perspective on the world. He was a great luminary, just like the others I mentioned in my speech, and I knew all of them very well. Dave Packard was in the same fraternity I was at Stanford, and he came back to visit us when he was the U.S. Deputy Secretary of Defense; I had dinner with him at least half a dozen times. I was on an airplane with him from Washington, D.C., to Denver about six months before he passed away. Also, Howard Vollum sat down at my desk when I first joined Tektronix in 1978. I met Gordon Moore and Bob Noyce a few times at SEMATECH, including a barbeque at Bob Noyce’s house while I was at Coors MicroLithics. Tsuyoshi Kawanishi was the vice-chairman of Toshiba, and he took me to lunch three or four times at headquarters. Iwao Tachikowa essentially created my business in Japan. Reiner Klein Wassink, the inventor of surface-mount technology at Phillips, counseled me often on my trips through Europe. All of these people are famous, but Wally had such a huge impact on my life through his simplicity, sincerity, generosity, and probably most importantly, patience. I recognized Wally because that’s where it all began.

Happy Holden: Two things that people don’t know is that Wally has one of the first examples of a laser-drilled microvia, and Chuck holds a patent on the first photodielectric microvia, long before IBM.

Johnson: Your work currently involves organizing conferences and some “passing of the torch,” if you will, with information. Tell us about that.

Bauer: I feel like I was mentored by the best, and if I have something to share, then I want to encourage young people to open their minds too. One of the challenges we have today is these silly, little devices that we carry around with us; we tend to accept them as infallible, and we think that we can communicate using just tools. I’m not the first person to say this, and I’m not going to be the last, but one of the hardest things is to get young people to step across that threshold and realize that you don’t learn from your phone; you learn from people that you associate with and communicate with. They’re learning. Happy has said this before, but it’s important to understand that your data is essentially useless unless you analyze it and understand it. We move forward by turning data into information and knowledge into understanding so that we can truly impact the world around us in a positive way.


Johnson: The power is in the analysis.

Bauer: Exactly. My best example is that when my second son graduated from college, he only wanted to write code; he didn’t want to have to deal with any of the rest of it. Now, he’s managing a team of nine people developing new products, and he loves it. But 10 years ago, he said, “I don’t want to have anything to do with that.” So, help young people get more involved in societies like SMTA, where they network and learn how they can impact other people’s lives. In my presentation yesterday on three-dimensional printing, I talked about how it’s a great technology, but when the rubber hits the road, what does it do for people? People like Shashi Jain at Intel developed technologies where we use three-dimensional printing to dramatically increase the effectiveness and reduce the cost of treatment for scoliosis. Power comes from using technology to impact people’s lives.

Johnson: As you look forward to the next five years, what do you see changing in the industry?

Bauer: Right now, I’m excited about what’s going on with SMTA. I’m involved in other organizations, such as IMAPS, IEEE, and ASM, and one of the things that the SMTA has been doing successfully is involving young people and getting them on board. If you look back to when we were that age, what was the world’s biggest challenge? We had scientists and sociologists around the world telling us that the earth couldn’t support more than 4 billion people and that we were going to have mass starvation. And what did our generation do? We solved that problem. Today, the only reason anyone goes hungry is because of politics and distribution.

So, what’s one of the greatest problems we face today? Climate change. It doesn’t matter whether you believe in it or not; it is there. I have complete faith that today’s young people will solve that problem. Capitalism will drive them because there is money to be made in solving that problem. I’m not worried about it because I trust that they will solve it. We have to recognize that we’ve come a long way, and now it’s their turn; we just need to find a smooth way to hand it over. The biggest challenge is to engage them so that they accept that challenge, and I think they will.

Johnson: That’s an excellent point. Chuck, congratulations again, and thank you for your time.

Bauer: Thank you very much.


Suggested Items

I-Connect007 Editor’s Choice: Five Must-Reads for the Week

10/07/2022 | Andy Shaughnessy, Design007 Magazine
It’s been a busy week for I-Connect007. Managing Editor Nolan Johnson and I covered PCB West at the Santa Clara Convention Center, and, as you’ll see in my article below the place was packed. We have an article about SMTA International, scheduled for the end of October. I think the trade show season is looking good into 2023. People are done with COVID shutdowns and ready to get back to live trade shows and conferences. We’ll be in Minneapolis to bring you the latest news and technical information. We also have a news report about the European Union committing to craft its own version of America’s CHIPS Act. There’s a great interview with Dana Korf and John Strubbe about the latest innovations in materials at TUC. And columnist Paige Fiet explains why she is committed to making manufacturing “cool” again to help recruit and retain young technologists.

Catching up With Author Ed Chambliss: Fixing a ‘Broken’ Business Model

06/22/2022 | Dan Beaulieu, D.B. Management Group
I love books, especially good business books. In fact, I read three or four a week which I believe makes me a very discerning critic when it comes to ones with the right message. "A One-Legged Stool: How Shareholder Primacy Has Broken Business (And What We Can Do About It)" by Ed Chambliss is one that can help us in both business and life. It has the right message. This book is so timely and extremely important now because Chambliss brings to light one of the great wrongs in the thinking of the last century, an error that has broken business for the past 50 years—the idea that we are all in business to make money for our shareholders and (and all others, employees, customers, and vendors be damned). We all know where this has gotten us.

A Game Plan for Upskilling Your Fab Workforce

05/10/2022 | I-Connect007 Editorial Team
There’s been a lot of talk among PCB manufacturers about the need to upskill their workforce. But where do you start—do you set up your own program or send staff to third-party training centers? We asked David Hernandez, IPC vice president of education, to weigh in on this topic, and the criteria that goes into creating IPC training programs. In addition to upskilling strategies, David also delves into the need for our industry to develop a labor pipeline, as well as the challenges we face in hiring, training, and retaining employees in this industry during a tight labor market.

Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.