-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Real Time with…SMTAI 2020: KYZEN on How Maximized Stencil Life Improves Yields
September 16, 2020 | Real Time with...SMTAIEstimated reading time: 7 minutes
KYZEN Executive Vice President Tom Forsythe shares company updates on stencil cleaning with Nolan Johnson. KYZEN recently announced its newest stencil cleaning product—KYZEN E5631. Forsythe details how the product is best used, as well as the benefits it brings to maximizing stencil life and improving manufacturing yields.
View more videos and show-related content at Real Time with… SMTAI 2020 virtual.
I-Connect007 continues to deliver original reporting and coverage of the electronics design, electronics manufacturing, and contract manufacturing industries, including up-to-date information from the companies, associations, and supply chains globally. Find the latest news and information at I-Connect007.com.
Audio Transcript:
Nolan Johnson: Hi. Nolan Johnson here, virtually doing a video interview for Real Time with…SMTAI. And I’m talking virtually with Tom Forsythe from KYZEN. Tom, glad to have you here.
Tom Forsythe: Good to be here. Thank you so much.
Johnson: We’re here in the virtual ether sense, but we’re still talking about supporting a show. We’re talking about supporting SMTAI and some of the work that KYZEN has been doing and announcing during the show. What do you have on stage for everybody?
Forsythe: Of course, KYZEN is the cleaning people, cleaning materials for the electronics industry. And we have a broad range of materials. Last year, we introduced our Aquanox 4727. That’s going very well in the marketplace. This year, we’re talking about a new stencil cleaning product because stencil cleaning touches all the users in the industry. Everybody who’s doing assemblies, at some point, whether they’re doing it with a handkerchief or a more sophisticated process, has to clean up their stencils, so they get a good print. The old adage that I don’t know that anybody has ever proven, but no one has denied that well over 50% of the problems in assembly all go back to the printer, which comes back to the print and often lays at the foot of that whole print-stencil interface.
Johnson: That’s a pretty critical place to be then.
Forsythe: Absolutely. It’s not someplace that everyone focuses on. Stencil cleaning is whatever is worse than being a redheaded stepchild—I think maybe the cousin of a redheaded stepchild, or something like that. And that’s why a lot of the products that are used in that space are decades old. It’s not uncommon for that because there hasn’t been a lot of scrutiny. We’ve done a lot of research over the last number of years, digging into this, constantly moving the ball. And our new product, KYZEN E5631 really answers the mail on that from economics, health and safety, as well as utility, being able to be used under the screen on the printer and offline, and a stencil cleaner for that more periodic robust cleaning.
Johnson: For those who aren’t that familiar with stencil cleaning and the process, walk us through how you use the product and where it hits.
Forsythe: There are really two different ways that stencil cleaning happens. The easier way, or the least impactful way, is on the printer itself. Most of the medium- to high-end printers now come with a cleaning mechanism on it. That mechanism usually has three potential capabilities. There’s the under-screen roll, the little wiper thing that people are familiar with. There’s often a vacuum assist that sometimes is used, or not, to help kind of vacuum off the material. And there’s the solvent—some kind of solvent—that goes on there that actually does the cleaning part because we all know solder paste isn’t exactly like crumbs on the kitchen table.
Solder paste is gooey and has a lot of viscousness to it, and if you’re just pushing it around with a dry towel, that’s going to cause a problem downstream. You use that solvent material or aqueous material, in this case, to wipe that off—to get it off—and then you wipe it with the towel. That’s the one that many people are familiar with—that onscreen thing. And people do that every so many cycles or prints. The spaceship people do it after every print or darn near. And obviously, if they’re making consumer products, it’s after a whole lot of prints, and that’s more of kind of a local decision.
The other mode that stencil cleaning happens in is the periodic cleaning where that wiping and whatnot is all well and good. But after a while, you need to kind of do heavy-duty cleaning, get into the crevices and corners very effectively. Stencils get swapped out with little or no downtime doing that. And we take that stencil and put it into an offline stencil cleaning machine. A number of people make those. We’re not in the equipment business; we don’t do that.
Our material goes into the machine, and then you have a normal wash, rinse, and dry. Typically, it’s in a one chamber type of thing. It’s not conveyorized or anything like that. But they’re often designed and purpose-built for it. The stencils are roundabout three-foot squared—not quite—but only a couple inches thick. Stencil cleaners often look like toasters in that they have slots on the side or on top or skinny doors that the stencils just slide in, the door closes, and it runs its process.
One of the advantages of the E5631 is that it’s designed to be used in both of those applications. It can be used under the screen or in the offline stencil cleaning at economical concentrations—anywhere from 10 to 25%. It depends on the soil you’re cleaning, and—in some cases—how long it has been. If you’ve left it on the printer for 1,000 cycles, which is a vast overstatement, it might take a little longer to clean, and it might take a slightly higher concentrate.
Johnson: Is there an advantage to using one cleaning solution in both applications?
Forsythe: It’s just simplicity. If I’m cleaning stencils, I’m using product A, or in our case, product E5631, rather than having two different materials with two different stock numbers, two different things to run out of, and two different things that can—if somebody’s new—mix up and put the wrong one in the wrong machine. Most quality shops wouldn’t encounter any of those problems, but eliminating the potential for them is a fundamental positive.Page 1 of 2
Suggested Items
Indium Corporation to Present, Exhibit at EPP InnovationsFORUM
03/28/2024 | Indium CorporationIndium Corporation is set to present and exhibit at EPP InnovationsFORUM, one of Europe’s premier single-day electronics manufacturing forums, on April 17 in Leinfelden-Echterdingen, Germany. Topic areas for 2024 will include AI, automation, sustainability, and quality.
Reducing Nitrogen Consumption in Convection Soldering with Rehm Thermal Systems' Patented Mechatronic Curtain
03/28/2024 | Rehm Thermal SystemsCurrent developments indicate a need for larger throughput heights due to the trend towards e-mobility, which in turn increases nitrogen consumption for process inertization. Rehm Thermal Systems responds to this issue with an innovative solution: the mechatronic curtain.
Indium Corporation, Industry Partners to Showcase Products “Live@APEX”
03/26/2024 | Indium CorporationIndium Corporation®, in cooperation with its industry partners, will feature its proven solder solutions live on the show floor throughout IPC APEX Expo from Apr. 9‒11 in Anaheim, Calif., U.S.
ITW EAE Wins New Product Introduction Award for Electrovert® Wave Soldering Machine Deep Wave
03/26/2024 | ITW EAEITW EAE is proud to announce that it has earned a 2024 New Product Introduction (NPI) Award for Electrovert’s Deep Wave option for wave soldering machines. This new, innovative system provides the ability to pump up to a 20 mm wave height.
Mek's Next-Gen AOI Technology Takes Center Stage at IPC APEX EXPO 2024
03/19/2024 | MEKMek is excited to announce its presence at IPC APEX EXPO, North America's largest electronics manufacturing event, in Anaheim, California, from April 6-11, 2024. Attendees are invited to visit Mek at booth #1433 to explore the latest AOI technology offerings.