High-Tech, High-Value Cleaning Answers Made Easy With KYZEN’s Tech-2-Tech


Reading time ( words)

Thanks to KYZEN’s Tech-2-Tech initiative, I’ve been taking the opportunity to broaden my knowledge of the fundamentals of cleaning electronic assemblies.

Tech-2-Tech offers a wide-ranging selection of well-chosen topics, covering diverse aspects of selecting, evaluating, operating, and maintaining cleaning processes. These were clearly explained in a series of focused 15-minute sessions, each one presented by a different member of KYZEN’s team of industry experts. It’s amazing how much practical information can be effectively transferred and explained in a 15-minute slot, especially one that’s cleverly designed to fit conveniently into the working day with minimum disruption and includes time to grab a coffee!

Tom_Forsythe_300-1119.jpgThe series began back in July, led by KYZEN Executive Vice President Tom Forsythe exploring the expectations of a cleaning process and the relative merits of short-term evaluation versus extended field trial for real-life characterisation. “Cleaning products must clean,” he remarked, “Cleaning agents must touch the dirt, and contaminants must be managed.”

Without getting buried in scientific detail, Forsythe described traditional cleaning technology and compared it with the complexity of soils currently encountered, the consequent complexity of the processes required to remove them, and the critical importance of effective rinsing. “It’s about balance and strength—enough solvency power to clean and enough pH to manage the soils and keep them in solution.”

Forsythe also discussed the dynamics of the cleaning process, particularly when operating in a real-world scenario, and the value of gathering and reviewing all the data from a trial before making production decisions. “It’s a long journey, with some ups and downs and some bends in the road. Some days, it rains!”

Subsequent sessions have included discussion of the five forces of cleaning; the significance of pH and how to maintain it; the importance of rinsing; the causes, consequences, and avoidance of foaming; optimisation of cleaner concentration; manual concentration monitoring and the benefits of automated monitoring; determination of process bath life, and overcoming the challenges of cleaning under low-stand-off tight-pitch components.

KYZEN_summary_screen.jpg

Recordings of all of these past sessions are readily accessible on-demand online, together with downloads of the corresponding Q&A sessions—practical answers to sensible questions! And, of course, the KYZEN team are always available to respond to any further queries which may subsequently arise.

Still to come, on December 3 at 3:18 p.m. GMT and December 4 at 1:33 a.m. GMT (the alternative time slots to align with North American, European, and Asian time zones) will be Jack Reinke’s session on the environmental impact of a PCB cleaning agent: its potential effect on the waste stream and whether or not to put spent process solution down the drain. A definite date for our diaries!

KYZEN_schedule.jpg

For those whose primary interest is metal finishing, KYZEN provided a full alternative programme with each session focused on a specific aspect of cleaning in metal finishing. To KYZEN’s great credit, the Tech-2-Tech initiative provides an intelligently constructed agenda of no-nonsense practical information, advice, and guidance for the benefit of decision-makers, engineers, and technical staff engaged in electronics assembly.

Presented in plain language with interesting analogies, KYZEN’s webinar supplies a wealth of valuable information, presented in an informal and easily assimilated style, with intelligent answers to intelligent questions, refreshingly free from commercial promotion.

I have greatly enjoyed the experience and look forward to the next chapter.

Register today at Tech2TechbyKYZEN.COM.

Share

Print


Suggested Items

Just Ask Greg: Advice on Purchasing SMT Stencils

10/21/2020 | I-Connect007 Editorial Team
We asked you to send in your questions for Happy Holden, Joe Fjelstad, Eric Camden, and John Mitchell in our “Just Ask” series. Now, Greg Smith, an SMT007 columnist, gets a chance to answer a question.

90% Solder Dross Recovery: Eliminate Waste, Save Money

10/20/2020 | Nolan Johnson, I-Connect007
The impact of 90% solder dross recovery can have a substantial impact on reducing waste and increasing cost savings. Nolan Johnson recently spoke with Jay Hardin, MS2® product manager at P. Kay Metal, about the process and benefits of efficient solder dross recovery, as well as product roadmaps, the soldering machine market, and raw materials supply chain for solder alloy manufacturing. As Jay says, “For many companies, the savings are in the thousands or millions” of dollars.

Part 5 of Siemens’ Digital Twin Webinar Series: Managing the Digital Thread

10/07/2020 | I-Connect007 Editorial Team
I-007e Micro Webinars recently released a free, on-demand series titled “Implementing Digital Twin Best Practices From Design Through Manufacturing” with Siemens' Jay Gorajia. In part 5, Gorajia discusses “Managing the Digital Thread From Design to PCB Assembly Engineering.”



Copyright © 2020 I-Connect007. All rights reserved.