Creative Materials Introduces 904-64A/B


Reading time ( words)

Creative Materials introduces 904-64A/B, a two-component silicone addition-cured potting compound. This high performance product is red in color, is thermally conductive, room-temperature curing, and low shrinkage. In addition, it features easy air release as well as excellent mechanical, thermal and shock resistance properties. 904-64A/B has a wide service temperature range and excellent chemical resistance. It has a rating of UV 94V-0 and when fully cured will not undergo reversion under normal operating conditions. 

904-64A/B is widely used in the manufacture of electrical and electronic components as a cushion coating, as well as an encapsulant and potting compound. Typical applications include electronic transformers, inductors, sensors, oceanic equipment and aerospace components. 

The cured properties of 904-64A/B include shore hardness >65A, service temperature between minus 55°C and 300°C, tensile strength >575 psi, dielectric strength 650 VTM and thermal conductivity of 1.75 W/mK. 

Creative Materials designs, develops, and custom manufactures specialty electronic inks and adhesives. The company holds both ISO9001 and ISO14001 certifications.  All products are manufactured in the USA.

Share




Suggested Items

It’s an Exciting Time in Electronics

10/06/2022 | Sal Sparacino, SMTA
SMTA International is just around the corner, and we are excited to be meeting fully in person and onsite. The conference and expo runs from Monday, Oct. 31 through Thursday, Nov. 3, returning to the Minneapolis Convention Center. Once again, we will co-locate with Medical Design & Manufacturing Minneapolis 2022 (MD&M). As the world continues to adjust to the new normal following nearly years of the pandemic, an in-person industry conference and exhibition is more valuable than ever.

Exploring High Density With Axiom

05/06/2022 | I-Connect007 Editorial Team
Nolan Johnson and Barry Matties talk with Axiom’s Rob Rowland and Kevin Bennett about the current high-density challenges facing EMS manufacturing. In this interview, Bennett and Rowland zero in on component packaging and feeder technology as critical areas in need of improvement.

The Reality of Regulated Manufacturing

04/12/2022 | Nolan Johnson, I-Connect007
Nolan Johnson speaks with Ryan Bonner, CEO of DEFCERT, about government regulations for data and cybersecurity. A key component of moving to a digital factory will be to ensure security of the data required to operate a digital factory, and most importantly, customer design data.



Copyright © 2022 I-Connect007 | IPC Publishing Group Inc. All rights reserved.