-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueIPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
The Cost of Rework
In this issue, we investigate rework's current state of the art. What are the root causes and how are they resolved? What is the financial impact of rework, and is it possible to eliminate it entirely without sacrificing your yields?
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Dow Launches New DOWSIL CC-2588 Conformal Coating
October 8, 2021 | WEBWIREEstimated reading time: 2 minutes
Dow introduced new DOWSIL™ CC-2588 Conformal Coating, a tough, abrasion-resistant silicone-based material that protects printed circuit boards (PCBs) and electronic components against high humidity and corrosion. This highly reliable silicone-based coating is virtually odorless and offers extremely low volatile organic compounds (VOCs). DOWSIL™ CC-2588 Conformal Coating cures at room temperature for reduced energy consumption, supports spraying for higher throughputs and enables automated inspection equipment to use ultraviolet light (UV) to identify any voids in the conformal coating.
“Dow’s silicone-based conformal coatings can resist extremely harsh environments while supporting environmental sustainability and manufacturing productivity,” said Tong Wu, industrial electronics, global segment leader at Dow. “New DOWSIL™ CC-2588 Conformal Coating has an attractive balance of properties and is an important addition to our portfolio because it addresses customer needs and industry trends in PCB manufacturing and assembly.”
New DOWSIL™ CC-2588 Conformal Coating cures without ovens to form a tough, scratch-resistant surface. While traditional silicones offer resistance to humidity, high temperatures and chemicals, they may lack abrasion resistance because of their rubbery nature. However, Dow’s new DOWSIL material, once cured, is comparable to other resin conformal coatings in terms of toughness. With a durometer of 76 Shore A, DOWSIL™ CC-2588 Conformal Coating offers good mechanical strength to resist damage. It also provides reliable adhesion without the delamination associated with acrylate conformal coatings and the darkening associated with polyurethane products. At room temperature, DOWSIL™ CC-2588 Conformal Coating has five minutes of tack time to support assembly adjustments before permanent bonding occurs.
Designed for harsh environments, DOWSIL™ CC-2588 Conformal Coating combines a UL 94 V-0 flammability rating with excellent electrical properties. Lab testing demonstrates that this protective coating meets IPC-CC-830B, Amendment 1 requirements for insulation resistance and dielectric withstanding voltage. Insulation resistance testing measures the total resistance between any two points separated by electrical insulation and, therefore, determines the effectiveness with which a test specimen resists the flow of electrical current. Dielectric withstanding voltage testing applies a voltage that is higher than the operating voltage across the thickness of a test specimen’s dielectric layer, thus demonstrating the specimen’s ability to withstand power surges and other increases in voltage.
The new Dow conformal coating is formulated to have a high concentration of solid components and can readily dry to a film thickness of 50 to 200 microns in a single spray. This higher solid content virtually eliminates bubbles (less than 10min) that, in previous conformal coatings, caused voids and exposed substrates to contamination. Further, when dispensed, DOWSIL™ CC-2588 Conformal Coating has a viscosity that is easy to lower by adding DOWSIL™ OS-20 Silicone Fluid, which is also essentially odorless.
DOWSIL™ CC-2588 Conformal Coating provides the dielectric insulation, vibration dampening and moisture protection needed in PCB manufacturing and assembly for automotive electronics and household appliances. In network transformers, DOWSIL™ CC-2588 Conformal Coating may keep coils from loosening and provide cushioning against stress.
DOWSIL™ CC-2588 Conformal Coating is available worldwide through Dow and its extensive network of distribution partners.
Suggested Items
The Chemical Connection: An Exhibitor’s View of IPC APEX EXPO
02/28/2024 | Don Ball -- Column: The Chemical ConnectionWhen I learned that this issue would be dedicated to optimizing the bare board fabricator’s experience at the IPC APEX EXPO 2024, I thought it would be an easy column to write. With more than 40 of these shows under my belt, I didn’t think it would be too difficult to come up with a list of dos and don’ts to make your visit to an exhibitor’s booth worthwhile. So, what can you do to make your visit even more useful?
The Shaughnessy Report: In Bed With Embedded
02/12/2024 | Andy Shaughnessy -- Column: The Shaughnessy ReportWe’re always hearing about PCB technology running into a wall. On the design side, Moore’s Law hit one such wall. On the fab side, features are now so tiny that the traditional subtractive methods have hit another type of wall. And we see OEMs who never planned to use flexible circuits wind up embracing them, because rigid boards just won’t fit into a new product’s form factor. In the February 2024 issue of Design007 Magazine, our expert contributors lay down the foundation of knowledge that designers need to be aware of to make intelligent, educated decisions about embedded design.
Nan Ya Posts Lower 2023 Results
01/19/2024 | Nan Ya PCBTaiwan-based Nan Ya PCB Co. Ltd has posted unaudited sales of NT$2.68 billion for December 2023, down by 11.77% month-on-month and by 53.4% year-on-year.
Compeq November Revenues Reverses Growth, Down 4% MoM
12/27/2023 | CompeqTaiwan-based Compeq Manufacturing Co. Ltd has reported revenues of around NT$7 billion ($226.36 million at $1:NT$30.95) for the month of November, down by 4.3% from the previous month—breaking its four-month growth trend—but down by just 1.42% year-on-year.
UHDI Fundamentals: Talking UHDI with John Johnson, Part 2
12/26/2023 | Steve Williams, The Right Approach Consulting LLCAmerican Standard Circuits is an early adopter of Averatek’s A-SAP™ process for its ultra-high density interconnect (UHDI) products. I had the opportunity to sit down with industry veteran John Johnson to discuss this. John, who previously worked at Averatek, currently works as vice president of business development at American Standard Circuits where he oversees quality.