Another Look at AOI


Reading time ( words)

PCB inspection is taking on greater significance as boards and packaging become increasingly smaller, with greater functionality. Automated optical inspection (AOI) and its backup associate, X-ray, team up to catch a variety of board assembly problems. But it’s AOI that’s at the forefront of this process.

AOI takes on a variety of key assignments, such as checking out the numbers labeled on passive and active devices and matching them with the database to assure they’re legitimate components, as specified in the bill of materials (BOM). Also, if alternate parts are used, the AOI machine is trained to verify them, regardless of manufacturer, as long as the device has the same footprint, value, tolerance, voltage, package type, etc.

That’s only the beginning. AOI is excellent at detecting missing or wrong components and misalignments. If a component is misaligned, say at 30° or 45°, AOI catches it. It also catches opens and bridging, and it can check for skewed parts and tombstoning. AOI can detect anything as long as it’s written on the component.

Read the full column here.


Editor's Note: This column originally appeared in the October 2013 issue of SMT Magazine.

Share




Suggested Items

The Critical Balance of Supply and Inventory Control

09/07/2022 | I-Connect007 Editorial Team
Can you still design a product and expect to see validation by the next week? The Epoch International Enterprises team of Meghan Zou, Foad Ghalili, Lillian Lin, and Crystal Zhang provide insight into what their distributors have up against over the past two years as they seek to source and validate parts. Often, it means finding alternatives, redesigning the project, and worst of all, sitting and waiting.

Exploring High Density With Axiom

05/06/2022 | I-Connect007 Editorial Team
Nolan Johnson and Barry Matties talk with Axiom’s Rob Rowland and Kevin Bennett about the current high-density challenges facing EMS manufacturing. In this interview, Bennett and Rowland zero in on component packaging and feeder technology as critical areas in need of improvement.

VJ Electronix: Automating the X-ray Inspection Process

05/04/2022 | Nolan Johnson, I-Connect007
VJ Electronix's Brennan Caissie shares the benefits of a new inspection tool that can be used on a variety of boards, with an automated system that takes the pressure off the manufacturing floor operators and can provide feedback all the way to the design process.



Copyright © 2022 I-Connect007. All rights reserved.