Forensics Uncovers Elusive Defects & Saves PCB Designs


Reading time ( words)

Can something as tiny as a microCSP-packaged device, as shown in Figure 1, be the cause of a PCB design defect or its complete failure? As you can see, this tiny package is as small, or even a bit smaller than the letter “L” in the word “Liberty” that is printed on the dime.

That’s only part of the story. The other part is you and your CM or EMS provider have no clue that’s where the defect lies, and worse, even if you guessed that the micro-CSP-packaged device posed the problem, you couldn’t find it because it is so elusive and so extraordinarily small.

Today, OEMs are increasingly moving toward smaller, more portable products and systems. Most of those used to be larger, desktop models a few years ago. However, with recent advances in electronics technologies, various markets are demanding smaller products and systems with the same or greater functionality than their larger ancestors.

As a result, semiconductor and electronics suppliers are constantly shrinking their products and adding more functionality to comply with market demands. For CMs and EMS providers, it means moving toward smaller form-factor boards populated with such advanced, but smaller component and device packaging as micro-BGAs, micro-CSPs, package-on-package (PoP), 01005s, and others.

Finding the Defect and Saving the Design

Conventional inspection methodologies on the assembly floor include using advanced X-ray and automatic optical inspection or AOI and continue to be at the forefront for most PCB designs.

Yet, because these advanced inspection and analysis systems aren’t able to deliver, a newer form of inspection is making its presence known in our industry. We call the new form forensic analysis.

Read the full article here.


Editor's Note: This article originally appeared in the April 2014 issue of SMT Magazine.

Share

Print


Suggested Items

What Is Digital Twin Technology, and Why Is It So Important?

09/09/2020 | Happy Holden, I-Connect007
Happy Holden describes how Siemens' 12-part webinar series, “Implementing Digital Twin Best Practices From Design Through Manufacturing,” is an excellent series designed to educate the electronic manufacturing engineer on the progress of using a digital thread to improve products and performance.

The iNEMI 2019 Board Assembly Roadmap

06/01/2020 | Pete Starkey, I-Connect007
iNEMI continues to publish chapters of its 2019 Roadmap and recently presented an overview of its Board Assembly Roadmap Chapter in a webinar prefaced by Grace O’Malley, vice president of global operations. The new chapter is just the latest addition to this global effort from 23 working groups contributing expert input from all aspects of the electronics industry.

Koh Young Update With Quintin Armstrong

04/17/2020 | Real Time with...IPC
In this video interview from the show, Quintin Armstrong, Americas service and applications senior manager for Koh Young, updates Guest Editor Dick Crowe on Koh Young America's Technical Services Team, where the focus is on AOI of components and materials on the stuffed board, as well as demonstrations and training at their new facility in Duluth, Georgia.



Copyright © 2020 I-Connect007. All rights reserved.