NPL/SMART Group Conformal Coating & Cleaning Experience


Reading time ( words)

By far the best-attended seminar-workshop event at an excellent National Electronics Week (NEW) show was the NPL/SMART Group Conformal Coating and Cleaning Experience, seamlessly organised, coordinated, and managed by SMART Group Technical Director and showman extraordinaire Bob Willis.

Day One

Willis combined the exhibition and demonstration area with the seminar theatre to offer an integrated learning experience dedicated to cleaning and coating. The area was a bustle of activity for the three days of the show, several visitors having travelled from mainland Europe and Eastern Europe with attendance at this NPL/SMART event as their primary objective, and several UK assemblers I spoke to were looking to gain a clear understanding of the technology and available options before embarking upon in-house conformal coating.

An hourly series of short, punchy presentations from industry experts, interspersed with opportunities to ask questions and to see equipment and materials in real-time action, maintained a consistent momentum. In Willis' words: “It’s about getting them interested to start with!”

Getting people interested in design considerations was a task expertly undertaken by David Greenman from Humiseal. Appropriate and adequate conformal coating drawings were rarely provided, and conformal coatings were commonly specified for historical reasons rather than properly selected to suit the anticipated operating environment. It was important to check the compatibility of a coating with the components of the assembly, and particularly to determine the wettability of the solder mask to ensure good adhesion. “No clean is no option” was his comment about surface cleanliness prior to coating and he recommended SIR testing as a means of qualifying the complete assembly process.

Share




Suggested Items

Passing the Test With SMTA’s Rob Boguski

09/14/2022 | Andy Shaughnessy, I-Connect007
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

09/14/2022 | Dr. Ronald C. Lasky, Indium Corp.
It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.



Copyright © 2022 I-Connect007. All rights reserved.