Manncorp Updates Split-Vision Rework Station


Reading time ( words)

A rework station with higher-resolution split-vision for easier and more accurate alignment has been introduced by Manncorp. The lead-free system BR750, to be exhibited at the company's booth, #2907 at IPC APEX EXPO, also contains ultra-precise processing controls to meet the challenge of removal and placement of BGAs, CSPs, QFNs, PoPs, and other subminiature SMT devices.

Manncorp new rework station, the BR 750, features high-resolution split vision and generates three types of heating for enhanced performance. Component pickup and placement are automatic. The system is priced at $19,995.

A key to the system’s enhanced performance is its innovative heating, including independent and fully programmable top and bottom hot air, plus rapid on/off IR underheaters. The latter eliminates thermal tension that can damage boards or components adjacent to those being processed. With eight different set points, exact thermal conditions can be produced for profiles containing heating rate, target temperature, dwell time and cooling. The profiles are shown in real time on a convenient LCD display.

After entering their size, SMDs are automatically pre-aligned and picked up from the component nest at their exact centers. An upward-looking camera then verifies positioning at all four corners of each device, while split-vision optics and electronic zoom adjustment of up to 22x does the fine tuning. This procedure is said to be extremely efficient in handling rework involving removal and placement of the same components repeatedly. Added guidance comes from LED lighting that clearly projects superimposed images of component leads and PCB pads on a full color LCD display. The BR750 will handle PCBs up to 500mm x 550mm and component sizes from 1 mm x 1 mm to 60 mm x 60 mm.

“Our customers are most impressed with the advanced capabilities and performance of BR750 and equally amazed at its breakthrough price of only $19,995,” CEO Henry Mann stated. “By making quick work of desoldering, component removal, resoldering and placement, this machine will most assuredly prove to be a wise investment.” For details, call 1.800.PIK MANN (745.6266) or e-mail sales@manncorp.com.  

About Manncorp

Manncorp offers pick-and-place machines, stencil printers, reflow ovens, wave solder machines, turnkey systems, solder pastes, board cleaners, desiccant cabinets, nitrogen generators and more. Accessing www.manncorp.com is an informational experience. Not only are full details and specifications provided for the 250+ products, but prices are also attainable within five seconds after minimal contact information is provided.

Share



Copyright © 2015 I-Connect007. All rights reserved.