AIM Solder Strengthens Presence in China


Reading time ( words)

AIM Solder, a global manufacturer of solder assembly materials for the electronics industry, has appointed Cifon Zheng to the position of Sales Manager for East China. Cifon will promote AIM's full line of solder assembly materials to the company's rapidly expanding customer base in China.

With several years of experience selling to the assembly electronics industry, Cifon will be a great resource for AIM's existing and potential customers. Cifon's skills and expertise align perfectly with the advantages offered by AIM, further assurance that customers of AIM solder products will continue to receive unparalleled service and expert support in this important market.

"We are excited for Cifon to join our global sales team," said David Suraski, AIM's Executive Vice President, Assembly Materials Division.  "China is a very important, expanding market for I am confident that Cifon's expertise will be a great addition to AIM's sales and support network that is already in place."

Based in Suzhou, Cifon may be reached by phone at +8618816852735 or by email at czheng(at)aimsolder(dot)com.

About AIM

Headquartered in Montreal, Canada, AIM Solder is a leading global manufacturer of assembly materials for the electronics industry with manufacturing, distribution and support facilities located throughout the world. AIM produces advanced solder products such as solder paste, liquid flux, cored wire, bar solder, epoxies, lead-free and halogen-free solder products, preforms, and specialty alloys such as indium and gold for a broad range of industries. A recipient of many prestigious SMT industry awards, AIM is strongly committed to innovative research and development of product and process improvement as well as providing customers with superior technical support, service and training.

For more information about AIM, click here.

Share

Print


Suggested Items

SMTA Europe Webinar: What Is a Good Solder Joint, and How Can Solder Joints Be Tested?

11/18/2020 | Pete Starkey, I-Connect007
What is a good solder joint? And how can they be tested not only for purposes of process characterisation, optimisation, monitoring, and control but also for ensuring their long-term reliability? Pete Starkey details a webinar organised by the Europe Chapter of SMTA that was presented by Bob Willis, an expert in soldering, assembly technologies, and failure analysis.

This Month in SMT007 Magazine: Test and Measurement in a Smart Factory

11/03/2020 | Nolan Johnson, I-Connect007
Nolan Johnson spoke with MIRTEC President Brian D’Amico about how the role of test and measurement equipment is changing in the smart factory and how shops can adjust to make use of the new technology. D’Amico shares this insight: “While approximately 90% of U.S. electronics manufacturers recognize the potential of Industry 4.0 to improve productivity, many are slow to adopt smart factory solutions within the manufacturing process.”

Reducing Flux Splatter in Sensors and Camera Modules

10/30/2020 | Jasbir Bath, Shantanu Joshi, and Noriyoshi Uchida, Koki Solder America And Koki Company Limited
With the increased use of electronics in new technology areas, flux formulations are being developed to address the new and existing requirements. For sensors and camera modules used for Advanced Driver Assistance System (ADAS) and internet of things (IoT) applications, there is a demand for no-clean flux formulations in lead-free solder paste, which can reduce flux splattering during reflow.



Copyright © 2020 I-Connect007. All rights reserved.