Eunil Presents ECM-350 Table Coating Master


Reading time ( words)

Eunil presents the ECM-350 Table Coating Master, a highly accurate offline machine for small-quantity batch production.

Printed circuit boards (PCBs) are the foundation for electronics in every day products including automotive, consumer electronics, communications, and industrial and energy applications. Due to the evolution of these products, PCBs are often exposed to damaging environments ranging from moisture, dust, and harsh chemicals to extreme thermal cycling and vibration. Coating will provide protection needed.

Features include highly accurate and consistent Gantry Robot (X axis) & Table Robot (Y axis), ability to fix various products at Multi JIG, exhauster to inhale odor, and an internal UV lamp.

The most common uses for the coating are to inhibit leakage and short circuit due to humidity and contamination, to inhibit corrosion, to improve fatigue life of solder joints to leadless packages, and to provide mechanical support for small parts to prevent damages due to mechanical shock and vibration.

The advantages are that the automated selective coating is good for consistency, producing repeatable results. It increases productivity (high throughput and reduced labor costs), improves material utilization, and improves quality with little to no masking.

About Eunil

Eunil is a world-wide leader in the Factory Automation Industry as a manufacturer of SMD peripheral equipment. Recently, they have expanded the scope of the business to include the Semiconductor and Automotive industries. Eunil H.A., Americas, Inc. is proud to provide the best customer service in the industry, and ensure superior quality throughout their entire product line. Eunil also designs and builds custom equipment for their clients.

Share




Suggested Items

Passing the Test With SMTA’s Rob Boguski

09/14/2022 | Andy Shaughnessy, I-Connect007
I recently spoke with Rob Boguski, president of Fremont, California-based Datest and an SMTA vice president and board member. Rob explained why today’s test customers are asking for more information than the traditional pass/fail, offers a preview of SMTA International, and gives an update on SMTA’s planning strategy for the next five years.

Four Silver Linings in the Stormy Clouds of Pandemic, Supply Chain, and Inflation

09/14/2022 | Dr. Ronald C. Lasky, Indium Corp.
It may be difficult to see any bright spots in the current and recent economic situation. We have all experienced the devastation of the pandemic, supply chain issues, and most recently, inflation. However, as a senior technologist for an international materials supplier (Indium Corporation) and a professor of engineering at an Ivy League research university (Dartmouth College), I offer these four silver linings for those of us in the electronics industry.

Solder Paste Printing and Optimizations for Interconnecting Back Contact Cells

07/26/2022 | Narahari S Pujari and Krithika PM, MacDermid Alpha Electronics Solutions
The interdigitated back contact (IBC) is one of the methods to achieve rear contact solar cell interconnection. The contact and interconnection via rear side theoretically achieve higher efficiency by moving all the front contact grids to the rear side of the device. This results in all interconnection structures being located behind the cells, which brings two main advantages. First, there is no frontside shading of the cell by the interconnection ribbons, thus eliminating the need for trading off series resistance, losses for shading losses when using larger interconnection ribbons. Second, a more homogeneous looking frontside of the solar module enhances the aesthetics.



Copyright © 2022 I-Connect007. All rights reserved.