Fresh PCB Nuggets: Pros and Cons of the 6 Most Common Surface Finishes

NCAB_HarryKennedy.jpgA surface finish can be defined as a coating, either metallic or organic in nature, that is applied to a PCB to ensure the solderability of the metal underneath. Most of the surface treatment dissolves into the solder paste or wave solder during the soldering process, and the solder joint is forming between the solder and the copper. One exception is ENIG/immersion gold, where the solder dissolves the thin layer of gold and forms a joint with the underlying nickel phosphorous alloy.

NCAB_0720_F1.jpgThere are only two different types of surface finishes for PCBs: organic and metal. Here are the six most common finishes on the market:

  1. ENIG
  2. HASL leaded
  3. HASL lead-free
  4. Organic solderability preservatives (OSP)
  5. Immersion Sn
  6. Immersion Ag

OSP is more like a lacquer, which prohibits oxygen from attacking the copper underneath. All others are coating metals, and they may be applied using one of two different methods: electroless or immersion.

Electroless systems work in the same fashion; they use a reducing agent inside the bath itself. This means that the metal thickness increases during the whole period that the PCB is in contact with the solution.

An immersion systems process uses a chemical displacement reaction to deposit a metal layer onto the exposed metal surface of the PCB. The base metal donates the electrons that reduce the positively charged metal ions present in the solution. The immersion layer will continue to grow; however, as the thickness of the deposit increases, the rate of deposition falls. Therefore, the process is self-limiting.

Comparing both types and all available options can quickly demonstrate the relative benefits or drawbacks. Typically, the decisive factors when it comes to selecting the most suitable finish is the end application, the assembly process, and the design of the PCB itself.

For each of the six most common surface finish, these tables illustrate the pros and cons (Tables 1–6).

Table 1: ENIG pros and cons.

Table 2: HASL leaded pros and cons.

Table 3: HASL lead-free pros and cons.

Table 4: OSP pros and cons.

Table 5: Immersion Sn pros and cons.

Table 6: Immersion Ag pros and cons.

There is much more to understand about surface finishes. Each of the six surface finishes I mentioned has a different process for application, handling recommendations, storage conditions and time, baking requirements, thickness requirements, masking limitations and design considerations and concerns. Tables 1–6 are simply an overview. We always recommend discussing surface finishes with your PCB supplier as early as possible in the design stage.

Harry Kennedy is a field application engineer at NCAB Group.



Fresh PCB Nuggets: Pros and Cons of the 6 Most Common Surface Finishes


There are only two different types of surface finishes for PCBs: organic and metal. Harry Kennedy describes the pros and cons of the six most common finishes on the market.

View Story

Fresh PCB Concepts: 7 Options for Via Treatment


In some cases, it's acceptable to have via holes that are completely exposed in a PCB design. But there are many others where the hole should either be covered and/or tented, or in most cases, plugged. Jeffrey Beauchamp shares seven different via hole protection types based on IPC-4761.

View Story

Fresh PCB Concepts: Why Design and Produce PCBs Beyond Industry Specification?


While questions may be an annoyance, especially when you finally have a board designed and are ready to have it built for a product, Ruben Contreras explains the importance of asking these questions and requiring specifications.

View Story

Fresh PCB Concepts: What You Should Know About Your Board’s Solder Mask


It’s a weird time we’re all in, and for most designers, work has slowed down or even stopped. While work might have slowed, now is a good time to review some of your past PCB projects to see if you can improve functionality and reduce field failures. Harry Kennedy explains how one of the simplest ways to do that is to start from the top: solder mask.

View Story

Fresh PCB Concepts: The Benefits of Being a PCB Producer Without Owning Any Factories


With NCAB's infrastructure and factory management team based in China, many customers ask why they don’t own any factories. Jeffrey Beauchamp explains how it's part of the company's long-term strategy and an advantage to our customers that they don’t own any factories. Instead, they “own” what is most important: the relationship with the factory.

View Story

Fresh PCB Concepts: Controlled Impedance—Design to Testing


Ruben Contreras often gets questions from customers on one of his favorite subjects in PCB design: controlled impedance. Ruben explains how controlled impedance is a science, which is why he likes it; therefore, it must be designed and tested comprehensively.

View Story

Fresh PCB Concepts: Create PCB Fabrication Notes for Success


When NCAB Group receives Gerber files for an order, there are times Harry Kennedy cringes because there are missing pieces of information necessary to make sure the PCB is made with zero defects. As we come back to work for the New Year, Harry shares some key factors he wishes customers would consider before they send their files.

View Story


Fresh PCB Concepts: Designing a PCB for Telecom Applications


Jeff Beauchamp and Harry Kennedy discuss PCBs for telecommunication applications, including key factors to consider, such as design and material considerations. They also recommend involving your PCB supplier at the time of design to help ensure manufacturability at the lowest possible cost.

View Story

Fresh PCB Concepts: The Current Material Situation


We have all heard about the component crisis in the circuit board industry, and maybe you heard about the CCL shortage, but how many are aware of the bare board material shortage? Ruben Contreras explains the current material situation and tips to address this issue.

View Story

Fresh PCB Concepts: Getting It Right From the Start


When faced with critical time-to-market situations, it is all too easy to say, “It doesn’t matter because this is just the prototype; we can fix this later.” However, if the design is perfected from the beginning, cost savings can be applied, and manufacturability can be ensured. Perhaps most importantly, the design can be adapted with reliability in mind, leaving a seamless transition from prototype to production. How do we get it right from the start?

View Story

Fresh PCB Concepts: Why Material Selection Matters


When you’re designing a PCB, it’s standard to call out FR-4 material, but you could be holding yourself back or even exposing your board to risk by not knowing more about PCB materials. Let’s take a small look into why. What Is FR-4, exactly? Harry Kennedy of NCAB explains.

View Story

Fresh PCB Concepts: Qualities of Medically Applied PCBs


In this inaugural column from NCAB Group, Alifiya Arastu discusses details of PCBs used in medical applications, highlighting some of the differences in terms of demands and how the design must be handled.

View Story
Copyright © 2020 I-Connect007. All rights reserved.