-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueComing to Terms With AI
In this issue, we examine the profound effect artificial intelligence and machine learning are having on manufacturing and business processes. We follow technology, innovation, and money as automation becomes the new key indicator of growth in our industry.
Box Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
Alpha Assembly Solutions on Training, Education, and Low-Temperature Soldering
November 7, 2018 | I-Connect007 Editorial TeamEstimated reading time: 17 minutes
Fullerton: We want smaller chips to do more and dissipate more heat. Heat is one of the times when voiding can be a reliability concern. Many devices use a thermal plane on the bottom as their thermal interface material between the chip and the heat sink, which is the board. Voids in the material will undoubtedly reduce the thermal conductivity, but there is not a good understanding of what is the critical level. Is 10% or 20% good enough? How about 50%? No one knows the real number, so since we can measure it and we know that more must be bad, we strive towards less, but no one knows where that finish line is. We want to see increasingly less, even though continually driving down that number may not provide as many benefits as people think it does.
Matties: It becomes a diminishing return.
Fullerton: Correct.
Happy Holden: It's interesting because when you're telling us about companies hiring new engineers and expecting them to know all these practical elements, the same is true for printed circuit design and fabrication. Electrical engineers don't know how to design a PCB. They know all about Maxwell's equation and signal integrity but without any kind of hands-on experience. Do we need to rethink four-year degree programs and start focusing on offering four-year technology degrees where you don't have theoretical math and science classes, but more hands-on design and assembly so engineering graduates can start knowing a lot more about the real world in practical electronics? It costs your company money to train these people, and somebody has to pay for that. It probably comes out of your profits or your prices. A company that offers no training but offers lower prices versus a company that has all the training and gets the business is not a good financial model.
Fullerton: We follow a philosophy that our success is tied to our customers’ successes, so the things we can do to make our customers more successful will lead them to buy and use more solder materials in the long run. You’re right that there are certain situations where a low-cost competitor can undercut us, but that's not really where we play. We play in the value selling market and make sure that the total package that Alpha offers to our customers meets and exceeds their needs and expectations.
As far as the education levels and how to improve that at the university level, there are two things that I see as beneficial. One is something I took advantage of as an undergraduate—I went to a school that offered co-op. There are a number of co-op universities around the country, and I'm going to make a shameless plug for Kettering University in Michigan, which is where I earned my degree back when it was still called GMI Engineering & Management Institute. At Kettering University, completing a series of co-op experiences is a requirement. All students leave the school with a bachelor’s degree and two to three years of hands-on experience in the field that they work in as a requirement to graduate.
Drexel University in Pennsylvania is another good example where co-ops are an integral part of the requirements for their degree program. Other schools have optional programs that they offer their students that some take advantage of, so I sought out and chose a co-op school when I looked at my undergraduate education. I wanted to get both book learning and the hands-on part of the overall package.
Ford Electronics near Philadelphia where I grew up hired me when I was a student. I started as an 18-year-old that knew very little about engineering but learned as I went in that factory about how electronics were being manufactured, different processes, how a factory works, and who's responsible for what. When I graduated, I had practical real-world experience to accompany the piece of paper that said I had a degree in manufacturing engineering. This is a big piece of advice that I always encourage young people to look at when they are considering education opportunities—find ones that package hands-on learning along with classroom education.
The other side is schools like Rochester Institute Technology or Auburn University that have manufacturing labs and programs built around electronics and SMT-type manufacturing, but there are very few of those. There's a lot of investment and equipment and know-how that they need put into that. Manufacturing is not exactly a glamorous industry that is easy to recruit young people into as far as a degree program goes. There is a limitation on how many people are willing to put out that expenditure into building this kind of program and take a risk on a relatively limited field as far as they see.
Holden: I graduated with a lot of my friends because they worked for 14 months between their junior and senior year, so they graduated one year later, but they had over a year of hands-on experience.
Fullerton: There is no value you can put on hands-on experience, especially at that age when you're just learning and forming your understanding of the engineering field. Having hands-on experience where you’re around people that have been doing it for 10–30 years and seeing how they do things is priceless. Plus, you can make the mistakes that don't hurt anybody when you’re young, so you can learn from those mistakes and not repeat them later when it really matters—when you’re in charge of things.
Page 2 of 3
Suggested Items
Indium Corporation Expert to Present on Pb-Free Solder for Die-Attach in Discrete Power Applications
04/30/2024 | Indium CorporationIndium Corporation Product Manager – Semiconductor Dean Payne will present at the Advanced Packaging for Power Electronics conference, hosted by IMAPS, held May 8-9 in Woburn, Massachusetts, USA.
Taiyo Circuit Automation Installs New DP3500 into Fuba Printed Circuits, Tunisia
04/25/2024 | Taiyo Circuit AutomationTaiyo Circuit Automation is proud to be partnered with Fuba Printed Circuits, Tunisia part of the OneTech Group of companies, a leading printed circuit board manufacturer based out of Bizerte, Tunisia, on their first installation of Taiyo Circuit Automation DP3500 coater.
Vicor Power Orders Hentec Industries/RPS Automation Pulsar Solderability Testing System
04/24/2024 | Hentec Industries/RPS AutomationHentec Industries/RPS Automation, a leading manufacturer of selective soldering, lead tinning and solderability test equipment, is pleased to announce that Vicor Power has finalized the purchase of a Pulsar solderability testing system.
AIM Solder’s Dillon Zhu to Present on Ultraminiature Soldering at SMTA China East
04/22/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce that Dillon Zhu will present on the topic: Ultraminiature Soldering: Techniques, Technologies, and Standards at SMTA China East. This event is being held at the Shanghai World Expo Exhibition & Convention Center from April 24-25.
AIM to Highlight NC259FPA Ultrafine No Clean Solder Paste at SMTA Wisconsin Expo & Tech Forum
04/18/2024 | AIMAIM Solder, a leading global manufacturer of solder assembly materials for the electronics industry, is pleased to announce its participation in the upcoming SMTA Wisconsin Expo & Tech Forum taking place on May 7 at the Four Points by Sheraton | Milwaukee Airport, in Milwaukee, Wisconsin.