Indium Corporation Announces New Corporate Leadership


Reading time ( words)

Indium Corporation has promoted Greg Evans to CEO, and Ross Berntson to President and COO. Former CEO and company owner William Macartney III will continue serving as the Chairman of the Board.

Evans has been with Indium for 36 years. He began as a technical support engineer and quickly rose to product line manager, helping expand the company’s product lines into the SMT assembly field. As division director for Indium's electronics assembly materials, he guided the steady growth of the solder paste product line and instituted a formal corporate R&D function. Evans eventually became the VP of manufacturing and sales, overseeing the expansion of the company's manufacturing footprint and sales structure in the UK, Singapore, China, South Korea, and Malaysia, and addressing the growing global demand for Indium products. Evans was named president and COO in 1997, leading the company’s growth from dozens of people to over 800 and from one factory in Utica, New York to 12 facilities, worldwide. Under his leadership, Indium has earned numerous awards, honors, and recognition due to the strengthening of corporate culture and performance.

Evans earned his AAS in Engineering Science from Mohawk Valley Community College, his BS in Chemical Engineering from Clarkson University, and his MBA from Rensselaer Polytechnic Institute.

“Greg’s leadership has propelled Indium Corporation to the position of more than just an electronics assembly materials manufacturer and supplier of choice, but also an employer of choice,” Macartney III said. “I very much look forward to continuing our close work together as we spend many more years dedicated to the success of Indium Corporation and strengthening the company. Together, we are equally dedicated to the success of each member of the Indium Corporation family, and will work to secure our futures, achieve everyone’s potential, and uphold our company culture – The Indium Way.”

As CEO, Evans will focus, primarily, on the company’s long-term mission and strategies. His work will ensure the ongoing growth and vibrancy of Indium.

Ross_Berntson.jpgBerntson joined Indium in 1996 as a product specialist. He quickly rose to the roles of product manager, marketing leader, sales leader, tech support leader, and, most recently, as executive vice president. Berntson is an active member of numerous industry organizations, including IPC, iNEMI, IMAPS, and SMTA. He has published several technical papers and articles, and presented at technical conferences globally. Berntson has a master’s degree in business administration and a bachelor’s degree in chemistry from Cornell University, where he earned the Henny Wittink Memorial Marketing Prize and the George Caldwell Award.

“Over the past 20 years, Ross has been intelligent and strategic in his results-driven approach to leadership at Indium Corporation,” Evans said. “I look forward to continuing to work alongside Ross as we further secure Indium Corporation’s position as the global leader in quality electronics assembly materials and technical support.”

About Indium Corporation

Indium Corporation is a premier materials manufacturer and supplier to the global electronics, semiconductor, thin-film, and thermal management markets. Products include solders and fluxes; brazes; thermal interface materials; sputtering targets; indium, gallium, germanium, and tin metals and inorganic compounds; and NanoFoil®. Founded in 1934, the company has global technical support and factories located in China, Malaysia, Singapore, South Korea, the United Kingdom, and the USA.

For more information about Indium Corporation, click here

Share


Suggested Items

PCB Pad Repair Techniques

01/08/2018 | Bob Wettermann, BEST Inc.
There are a variety of reasons behind pads getting "lifted" completely or partially from the laminate of a PCB. Per the just revised IPC-A-610 Revision G, a defect for all three classes occurs when the land is lifted up one or more pad thicknesses. Lifted pads can occur when a device has been improperly removed or there is a manufacturing defect in the board construction. In any case, as with any repair, the ultimate decision on the ability to repair the pad lies with the customer.

Focus on the New

01/05/2018 | Stephen Las Marias, I-Connect007
It seems like it wasn't too long ago when I was writing about the optimism of the electronics manufacturing and assembly industry going into 2017. Now, here we are again at the beginning of the new year, looking at new trends, disruptive technologies, and emerging markets for 2018. I am also proud to announce our new branding as well as our fresh, new look.

Top 10 Most-Read SMT Articles of 2017

12/29/2017 | I-Connect007
Every year, we like to take a look back at the most popular SMT news and articles. These are the top 10 most-read SMT articles from the past year.



Copyright © 2018 I-Connect007. All rights reserved.