-
- News
- Books
Featured Books
- smt007 Magazine
Latest Issues
Current IssueBox Build
One trend is to add box build and final assembly to your product offering. In this issue, we explore the opportunities and risks of adding system assembly to your service portfolio.
IPC APEX EXPO 2024 Pre-show
This month’s issue devotes its pages to a comprehensive preview of the IPC APEX EXPO 2024 event. Whether your role is technical or business, if you're new-to-the-industry or seasoned veteran, you'll find value throughout this program.
Boost Your Sales
Every part of your business can be evaluated as a process, including your sales funnel. Optimizing your selling process requires a coordinated effort between marketing and sales. In this issue, industry experts in marketing and sales offer their best advice on how to boost your sales efforts.
- Articles
- Columns
Search Console
- Links
- Events
||| MENU - smt007 Magazine
4 Key Considerations When Auditing a New EMS Partner
June 7, 2019 | Neil Sharp, JJS ManufacturingEstimated reading time: 5 minutes
Deciding to hand over the control of your electronics manufacturing to an external provider relies on a high degree of confidence and trust on the part of both you and your manufacturing partner.
A multitude of benefits can come from joining forces with an electronics manufacturing services (EMS) partner, including:
- Providing you with a boost of external resources, expertise, and equipment
- Liberating you from the distractions of the day-to-day shop floor
- Enabling you to focus your energies on other core areas of your business
But choosing whether (or not) to outsource is also likely to bring a multitude of questions—and some understandable doubts. Outsourcing is a critical decision, and it’s one that will rely on thorough research, close examination, and asking some tough questions.
In this article, I summarize four key areas that you'll want to scrutinize as you embark on your supplier selection process.
1. Their Quality Management Systems (QMS)
Can your prospective EMS partner demonstrate the implementation of relevant national or international quality standards? And can they provide evidence of their current certification body audit?
Do they hold regular management reviews that focus on meeting targets and objectives for continuous improvement? Do they carry out internal audits of systems, processes, products, etc.? How are these acted upon?
What’s their average internal and external PPM or reject percentage over the past 12 months? What’s their average scrap percentage per build and their on-time-delivery percentage? Can they provide figures on the number of open customer concerns month on month and their response time?
What’s their process for generating certificates of conformance or analysis? Are certificates provided on each batch? Do they operate an effective calibration system with relevant equipment and audit plans? How do they manage customer, supplier, and internal complaints? What root cause techniques do they use and how can they demonstrate this?
And finally, what’s the general condition of their manufacturing/assembly areas? Do they operate a 5S program or something similar, and what’s their average score?
2. Their Approach to New Product Introduction (NPI)
Does your prospective EMS partner use advanced product quality planning (APQP) or an equivalent as part of their NPI process? And if they don’t, what’s their alternative?
What’s their process for obtaining sub-supplier approvals in relation to NPI? Do they provide a final sign-off document that includes failure modes and effects analysis (FMEAs), quality plans, data, and specifications? And do they conduct process verification to ensure process control before serial production?
Is process documentation available at each station and area within the production line? Are there start-up instructions and process sign-offs (checksheets, details, etc.) for production runs? Are there control plans and process flows in place on the production line? Who ultimately signs off an NPI before the product or machine shipping out to the customer?
What key process controls do they have in place, such as statistical process control (SPC) charts, and do they operate fail-safe systems to ensure products are produced correctly? Do they have defined process performance monitors in place, and are they transparent?
3. Their Supplier Control Processes
Can they provide you with an up-to-date approved supplier list? What’s their process for supplier selection, and how do they monitor performance? How often do they visit and audit their suppliers? And how do they manage, monitor, and track supplier concerns? What’s their strategy for managing purchase orders to ensure only approved vendors are used?
Do they operate a goods inwards inspection system, including inspection checksheets, sampling plans, results, measurement test facilities, calibration of facilities, certificates of analysis (COAs), and certificates of conformance (COCs)?
What’s their strategy for rejecting products that don’t meet their requirements? Do they run a first-in, first-out (FIFO) system that ensures full traceability through to the finished product?
Do they clearly identify and segregate non-conforming material (NCM) from approved parts? What’s their process for logging and reviewing all current NCM, and what internal format do they use?
Do they have adequate inspection facilities (i.e., X-ray for component inspection) to demonstrate product control and mitigate the risk against counterfeit components entering the supply chain?
And finally, are their material handling methods sufficient to prevent damage and contamination?
4. Their Approach to Strategic/Risk Management
Do they have a business continuity plan in the event of a natural disaster, industrial action, fire, etc.?
And do they operate a review policy to ensure that any gaps in supply are plugged and maintained via additional shifts, the use of alternative locations, extra tooling, etc.?
Unfortunately, saying they have a disaster recovery plan in place is not good enough; you are going to want to see evidence that it has been documented. You will also want to ensure that the plan is reviewed on an on-going basis to ensure it evolves as their business grows so that it remains relevant and fit for purpose.
For instance, do they have a risk assessment analysis? What emergency procedures are in place to deal with the immediate fallout of a disaster? What sort of measures do they have in place to re-ignite the supply chain should an unforeseen disruption occur? How will they ensure their staff retains the crucial engineering and manufacturing skills required to build client products? Do they have access to multiple manufacturing facilities, and what level of IT support do they have in place?
In addition to the huge body of evidence that your prospective EMS partner will need to provide, it’s going to be just as crucial to determining that they’re the right “personality fit” for your company. They will need to be able to demonstrate that they have the right combination of skills and experience to enable your business to grow. And just as importantly, they should have a genuine interest in who you are as a company and what you’re looking to achieve.
By combining exhaustive research with a healthy chunk of your own gut instinct, you can cover all of the bases to ensure your supplier selection process reaps a positive outcome and a long-lasting partnership.
Neil Sharp is the director of marketing for JJS Manufacturing.
Suggested Items
Real Time with… IPC APEX EXPO 2024: Tools, Training, and Trends in Manufacturing Engineering
04/25/2024 | Real Time with...IPC APEX EXPOGuest Editor Kelly Dack and Product Specialist Erik Bateham of Polar Instruments discuss Polar's latest technology, including their role in aiding manufacturing engineers. They highlight the advanced capabilities of Polar's tools and the critical role of signal integrity analysis, as well as the importance of accurate modeling in board manufacturing. Polar's unique training approach and demonstration contact details are also explored.
TTM Celebrates the Grand Opening of Its First Manufacturing Facility in Penang
04/25/2024 | TTM Technologies, Inc.TTM Technologies, Inc., a leading global manufacturer of technology solutions including mission systems, radio frequency (RF) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (PCBs), officially opened its first manufacturing plant in Penang, Malaysia with an investment of USD200 million (approximately RM958 million).
Listen Up! The Intricacies of PCB Drilling Detailed in New Podcast Episode
04/25/2024 | I-Connect007In episode 5 of the podcast series, On the Line With: Designing for Reality, Nolan Johnson and Matt Stevenson continue down the manufacturing process, this time focusing on the post-lamination drilling process for PCBs. Matt and Nolan delve into the intricacies of the PCB drilling process, highlighting the importance of hole quality, drill parameters, and design optimization to ensure smooth manufacturing. The conversation covers topics such as drill bit sizes, aspect ratios, vias, challenges in drilling, and ways to enhance efficiency in the drilling department.
Elevating PCB Design Engineering With IPC Programs
04/24/2024 | Cory Blaylock, IPCIn a monumental stride for the electronics manufacturing industry, IPC has successfully championed the recognition of the PCB Design Engineer as an official occupation by the U.S. Department of Labor (DOL). This pivotal achievement not only underscores the critical role of PCB design engineers within the technology landscape, but also marks the beginning of a transformative journey toward nurturing a robust, skilled workforce ready to propel our industry into the future.
Fujitsu, METRON Collaborate to Drive ESG Success
04/24/2024 | JCN NewswireFujitsu Limited and METRON SAS, a French cleantech company specializing in energy management solutions for industrial decarbonization, today announced a strategic initiative to contribute to the realization of carbon neutrality in the manufacturing industry.